The steel tubes that make up the frame and the legs are designed to fit together without screws or welding, for extra frame strength and to save you assembly time! Assemble the top and bottom sections of the trampoline frame, attach mat and springs and fix the retaining wall to the outside of the frame.
If they are not, adjust them now.
How to assemble a trampoline frame. Assemble the trampoline frame upside down. View and download sportspower 10ft assembly, installation, care, maintenance, and use instructions online. Here are some common mistakes we make while setting up our trampoline.
How to assemble a trampoline frame. You should have noticed on the frame that there are certain rivets in the frame. Once the trampoline has been delivered to your home, we will then unpack the trampoline and take it to the located that you want it put together at.
Taskers can do all the assembly starting from putting together the frame, installing the trampoline enclosure net, attaching the trampoline springs, adding the safety pad and jumping mat. Next, you will have to attach the frame to the legs. 10ft sports & outdoors pdf manual download.
Of course, make sure that the holes line up for attaching the screws down the path. Now, start connecting the springs to the trampoline. Use the handle of your spade to compact the.
It’s time to attach the net to the frame. However, to make the trampoline installation easier, we recommend that you prepare the following: You can set out the frame parts in the ground.
Ideally speaking, the warning label should be facing you. So why are you waiting to start the part by part trampoline assembly? Parts and assembly requirements, of course, vary across different models and taskers will be familiar with their build and assembly process.
Lift the trampoline into the hole and place on the ledge ensuring the frame is at the correct height. Step 1 the top frame must be adjusted to fit exactly to your trampoline. Please note that these instructions are based on assembling an atlantic trampolines trampoline frame, other trampoline frames may vary.
There are a few reasons you should assemble your trampoline frame upside down. These rivets are to hold your frame and the net together. The legs of the jumpxfun should be right next to the legs of your trampoline, and as close to the legs as possible.
Site the trampoline into the hole. Our trampoline packs include all the tools you'll need to assemble your trampoline. Assemble frame of trampoline before you start:
First, gather the top rails, the base of leg, and leg extensions. To begin with, assemble the legs. Two people are required to assemble the trampoline, remember to use gloves during assembly to avoid pinching.
Make sure the side with velcro is facing to the main frame. (3.05 m) quad lok trampoline and easi store enclosure. Check the manual to see if your trampoline has all the required parts and start from there.
Once everything is laid out, take a walk around and make sure all necessary parts are where they need to be. The first of these being that you typically have parts of the frame extend out from the frame. Once it is in the spot you want it put together at, we will begin to assemble the trampoline.
You have all the trampoline parts, necessary tools, and manpower. Make sure there is enough space with clearance to install the large shape. Keep the bolts or screws in their plastic wrapping until they are needed.
You want to take the net out of its packaging and expanded it out to its full length and width. Once they are attached, tighten the screws and bolts with help of the screwdriver and/or electric drill. You have to make sure that all the parts are in their designated place.
Trampoline frame is the base of trampoline, therefore you need to start with the frame. Check all the steps before assembling and read all precautions before using the trampoline. We recommend that you view our assemble video, before you start assemble your jumpxfun.
When it comes to assembling the trampoline, your first step might just be the hardest. To install the mat, begin by attaching one white mat rod at each location where the blue tags on the mat match with the blue stickers on the frame. Step 11 follow step 6 to assemble the small bounce mat for the slant trampoline frame tubes.
Taking the box and instructions to the area where the trampoline will be set up, begin laying out the circle or square parts for the frame and the legs. You can use a power drill to easily screw the bolts and set up the frame. Check that the center posts of the leg sections are correctly seated under the trampoline frame.
Now that you are familiar with trampoline parts, you can begin to make the frame. Assemble the upper supporting tubes labelled “20”, “21” and “22” according to the assembly diagram, then fasten the nuts and bolts using the tools provided. The springs will attach to the net and to the frame.
At this point, screw the frame to the legs. It requires at least two adults to assemble the trampoline. This blog post covers all you need to know about assembling your trampoline frame.